Steam heating glass-lined reactor
My company's steam-heating glass-lined reactor is a quality corrosion resistant enamel glaze made of high silica content, spraying metal-substrate surface, burning through the 950-degree heat and firmly close contact with the metal surface. Thus, it has a dual nature glass corrosion resistance and strength of metal, is an excellent corrosion-resistant equipment. It has been widely used in chemical, pesticide, medicine, food, research and other fields.
Steam heating the glass-lined reactor corrosion: resistance to various concentrations of inorganic acids, organic acids, organic solvents and corrosion weak base (hydrofluoric acid, fluorine ion media, the concentration of not less than 30% greater than the temperature equal to 180 degrees with the exception of concentrated phosphoric acid and alkali).
Open type glass lined reactor (K series reactor) Closed type glass lined reactor (F Series reactor)
Sdandard: HG/T2371-1992 Standard: HG/T2372-1992
K50-100L K200-500L K1000-5000L
Nozzle Orientation Nozzle Orientation Nozzle Orientation
F3000-5000L F10000-30000L
Nozzle Orientation Nozzle Orientation
Overall Dimensions and Parameters of Steam Heating Glass lined Reactor
Nominal | Actual | Heat exchange area of Jacket m2 | Model of Reducer | Spec.of stuffing box. DN | Spec of discharge valve | Stirred speed Rpm | |
Anchor and frame | Impeller /paddle | ||||||
K50 | 71 | 0.34 | BLD0.8-1 | 40 | 70 | 85 | 130 |
K100 | 128 | 0.66 | BLD0.8-1 | 40 | 70 | 85 | 130 |
K200 | 247 | 1.26 | BLD1.1-1 | 50 | 80 | 85 | 130 |
K300 | 369 | 1.75 | BLD3.0-3 | 65 | 80 | 85 | 130 |
K500 | 588 | 2.64 | BLD3.0-3 | 65 | 80 | 85 | 130 |
K1000 | 1250 | 4.54 | BLD4.0-3 | 80 | 100 | 85 | 130 |
K1500 | 1720 | 5.34 | BLD4.0-3 | 80 | 100 | 85 | 130 |
K2000 | 2160 | 7.02 | BLD4.0-3 | 80 | 100 | 85 | 130 |
K3000 | 3380 | 8.61 | BLD5.5-3 | 95 | 125 | 85 | 130 |
K5000 | 5170 | 14 | BLD5.5-3 | 95 | 125 | 85 | 130 |
K5000 | 5220 | 13.4 | BLD5.5-3 | 95 | 125 | 85 | 130 |
F3000 | 3100 | 8.61 | BLD5.5-3 | 95 | 125 | / | 130 |
F5000 | 5050 | 13.2 | BLD5.5-3 | 95 | 125 | / | 130 |
F5000 | 5050 | 13.2 | BLD5.5-3 | 95 | 125 | / | 130 |
F10000 | 11670 | 21.35 | BLD15-5 | 110 | 150 | / | 125 |
F15000 | 16450 | 27.7 | BLD18.5-6 | 160 | 150 | / | 125 |
F20000 | 21790 | 34.04 | BLD18.5-6 | 160 | 150 | / | 125 |
F30000 | 32610 | 44.7 | BLD30-7 | 160 | 150 | / | 125 |
Nominal volume L | Sizes(mm) | Approx Weight kg | ||||||||||||
D | D0 | D1 | D2 | D3 | D4 | H | H1 | H2 | H3 | L | h | |||
Anchor and frame | Impeller /paddle | |||||||||||||
K50 | 500 | 350 | 600 | 706 | 270 | / | 465 | 300 | 265 | 945 | 2030 | 50 | 90 | 477 |
K100 | 600 | 420 | 700 | 816 | 270 | / | 565 | 300 | 300 | 945 | 2170 | 60 | 110 | 548 |
K200 | 700 | 490 | 800 | 918 | 300 | / | 770 | 350 | 345 | 954 | 2440 | 60 | 130 | 728 |
K300 | 800 | 560 | 900 | 1048 | 350 | / | 870 | 350 | 380 | 1154 | 2770 | 80 | 150 | 1020 |
K500 | 900 | 630 | 1000 | 1128 | 350 | / | 1070 | 400 | 405 | 1154 | 3040 | 80 | 160 | 1225 |
K1000 | 1200 | 840 | 1300 | 1488 | 400 | / | 1270 | 500 | 480 | 1276 | 3430 | 100 | 210 | 1906 |
K1500 | 1300 | 910 | 1450 | 1622 | 400 | / | 1470 | 500 | 505 | 1276 | 3670 | 100 | 210 | 2383 |
K2000 | 1300 | 910 | 1450 | 1622 | 400 | / | 1815 | 500 | 505 | 1276 | 4010 | 100 | 210 | 2595 |
K3000 | 1600 | 1120 | 1750 | 1964 | 450 | / | 1810 | 600 | 580 | 1326 | 4185 | 130 | 240 | 3891 |
K5000 | 1600 | 1120 | 1750 | 2050 | 450 | / | 2775 | 600 | 580 | 1326 | 5150 | 130 | 240 | 4200 |
K5000 | 1750 | 1200 | 1900 | 2150 | 450 | / | 2480 | 700 | 620 | 1326 | 5030 | 130 | 270 | 5274 |
F3000 | 1600 | 1120 | 1750 | 1964 | 600 | / | 2290 | 1200 | 150 | 1326 | 4300 | / | 240 | 3554 |
F5000 | 1600 | 1120 | 1750 | 2050 | 600 | / | 3290 | 1200 | 150 | 1326 | 5300 | / | 240 | 4388 |
F5000 | 1750 | 1200 | 1900 | 2150 | 600 | / | 2935 | 1200 | 150 | 1326 | 5000 | / | 270 | 5161 |
F10000 | 2200 | 1540 | 2400 | 2734 | 800 | / | 3668 | 1420 | 230 | 2180 | 6170 | / | 360 | 8150 |
F15000 | 2400 | 1680 | 2600 | 2940 | 800 | / | 4326 | 1400 | 230 | 2180 | 7280 | / | 360 | 11970 |
F20000 | 2600 | 1820 | 2800 | / | 900 | 2000 | 4776 | / | 250 | 2180 | 7710 | / | 400 | 15000 |
F30000 | 3000 | 2100 | 3200 | / | 1100 | 2100 | 5575 | / | 280 | 2200 | 8360 | / | 450 | 20700 |
Nozzle Sizes Table of Steam Heating Glass Lined Reactor
Nominal volume L | a | b | c | d | e | f | g | h | k | m | Discharge | Inlet/Outlet | Vent |
K50 100 | 80Hand/ sight | 70 | 70 | 70/ Light Hole | 70 | 70 | 3-20 | 1/2" | |||||
K200 | 125/ Hand Hole | 80 | 70 | 80 | 70/ Light Hole | 70 | 70/ Sight Glass | 80 | 3-25 | 1/2" | |||
K300 | 125/ Hand Hole | 100 | 70 | 80 | 70/ Light Hole | 70 | 70/ Sight Glass | 80 | 3-25 | 1/2" | |||
K500 | 150/ Hand Hole | 100 | 70 | 100 | 80/ Light Hole | 125 | 80/ Sight Glass | 80 | 3-32 | 1/2" | |||
K1000 | 300×400 | 125 | 100 | 100 | 100/ Light Hole | 125 | 100 | 100/ Sight Glass | 100 | 3-32 | 1/2" | ||
K1500 2000 | 300×400 | 125 | 100 | 100 | 125/ Light Hole | 125 | 100 | 125 | 100 | 2-50 3-40 | 1/2" | ||
K3000 K5000( φ1600) | 300×400 | 125 | 100 | 100 | 125/ Light Hole | 125 | 100 | 125 | 125 | 2-70 3-50 | 1/2" | ||
K5000 φ1750 | 300×400 | 125 | 125 | 150 | 125/ Light Hole | 125 | 125 | 150 | 125 | 4-70 | 1/2" | ||
F3000 F5000(φ1600) | 300×400 | 125 | 100 | 100 | 125 | 125 | 100 | 125 | 125 | 5-70 | 1/2" | ||
F5000 φ1750 | 300×400 | 125 | 125 | 125 | 125 | 150 | 125 | 150 | 125 | 6-70 | 1/2" | ||
F10000 | 300×400 | 200 | 150 | 150 | 150 | 150 | 125 | 150 | 150 | 125 | 150 | 4-80 3-70 | 3/4" |
F15000 | 450 | 250 | 150 | 150 | 150 | 150 | 125 | 150 | 150 | 125 | 150 | 7-100 | 3/4" |
F20000 | 450 | 250 | 150 | 150 | 150 | 150 | 125 | 150 | 150 | 125 | 150 | 7-100 | 3/4" |
F30000 | 450 | 250 | 150 | 150 | 150 | 150 | 125 | 150 | 150 | 125 | 150 | 7-125 | 3/4" |
Main Technical Performance of Steam-heating Glass Lined Reactor
K,F Series Glass Lined Reactorr
| Max.Operation pressure (Mpa) | Opertion temperature °C | Thickness of Glass lining
| High voltage test to glass lining layer | ||||
Inside of vessel
| Inside of jacket
| Inside of vessel
| Inside of jacket
| |||||
Stuffing box
| Single face mechanical seal
| Double-face mechanical seal
| 0.6 | 0~200 | 0~200 | 0.8~2.0 | 20 (Retest of User:6) | |
0.25 | 0.4 | 0.6~1.0 | ||||||
Remark 1. If the pressure exceeds 0.4Mpa or operation temperature is less than 0 oC you should tell us on the order 2. Temperature difference Operation Limit for glass lining: cooling shock:110oC,thermo shock:120oC.(This is Destructive Test) |